Fiessler Programmable Safety Center
Description of function
The FPSC Fiessler Programmable Safety Center is a programmable electronic safety for personal protection, i.e. for safety functions. The FPSC complies with the highest safety requirements:
- SK1 through SK 4 according to EN 954-1
- SIL 1 through SIL 3 according to EN IEC 61508
- PL a through PL e according to prEN 13849-1
The product family FPSC provides maximum flexibility within its hardware and software structure. The FPSC - AD version offers the possibility to connect decentralized I/O modules via the implemented safety bus. This guarantees a modular system design that offers flexibility therefore reducing the costly and often elaborate configuration of the safe system bus.
The safety-related functions are programmable by using pre-assembled and tested software modules. The chaining is made by simple assignment of input , i.e. output adresses. Intermediate data are stored in the temporary storage. There are various ready-to-use software modules at your disposal.
For the communication with a superior control, i.e. for the operating sequence control or technology control, a serial interface is provided. The transfer of data for visualizing as well as the transfer of machine-relevant data can de realised via this interface.
The simple snap-on mechanism for fastening the items on the DIN rail in the switch cabinet considerably reduces the installation expenditure of the items of the product family.
FPSC properties
- Flexible Hard- and Software concept.
- Available with a safe bus system or/and two counter inputs.
- Reduction of expenditures in Mounting and Installation.
- Easy programmable.
- Software modules tested and certificated.
- Safety category 4 according to EN 954-1, SIL 3 according to IEC 61508.
- PL a through PL e according to prEN 13849-1.
- Compact Safety SPS.
- minimum response time.
Safety Integrity Level SIL 3 (IEC 61508)
Performance Level PL e (ISO 13849-1)
Safety category cat. 4 (EN 954-1)
FPSC Applications
- special plant.
- pressbrakes.
- eccentric press.
- shears.
- hydraulic press.
- testing automat.
- pneumatic press.
- special machines.
- machining centre.
- concatenated plants.
- final assembly.
- materials handling equipment.
- test stands.
- manual machines.
- robotics cells.
Accessories
Contact Extension
The contact extension FSEM serves FPSC to the extension or contact reinforcement for the safe control. Applications up to the category 4 after EN 954-1 can be realized.
FPSC - RS232 cable
Cable between the programming unit (PC, Notebook etc.) and the base units for programming the parameters.
FPSC - USB / RS232 adaptor
Interface converter from USB standard to RS232 for entering the parameters into the base units.
FPSC - CAN cable
cable for the safety-related networking of the decentralized modules and the base unit.FPSC-Profibus-DP
The FPSC-Profibus-DP serves to adapt a Modbus port from the FPSC to the ProfibusDP to EN 50 170. In this application, it functions as a gateway and operates as the ProfibusDP Slave. It can be operated by any standard-compliant Profibus Master.
FPSC Gateway to Profibus DP
FPSC-Ethernet-TCP/IP
The FPSC-Ethernet-TCP/IP module serves to adapt a serial port of the FPSC to an Ethernet with TCP/IP-protocol. In this application, it functions as a gateway and operates as a server. It can be operated at any processing system with TCP/IP-protocol.
FPSC Gateway to Ethernet
- Standard DIN-rail version.
- Reduction of expenditures in Mounting and Installation.
- Complete Ethernet according to IEEE 802.3
- Max. 1400 byte input- and 1400 byte output-data.
- Isolated Ethernet-interface.
- Support Modbus ASCII to Ethernet.
- Ethernet Protocol (UDP/IP or TCP/IP).
call usnow
+91-9311082008